TL;DR
Get cleaning gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Hunker reports that Malco’s TurboShear TS1, a $69.98 drill attachment designed for metal, can also cut vinyl siding and may be easier to use than a utility knife for curves and some detailed cuts. Its limits include corrugated panels and thicker materials, and the report’s product-rating data is based on Home Depot reviews rather than a controlled test.
Hunker reports that Malco’s TurboShear TS1, listed at $69.98, can cut vinyl siding as well as the metal materials it was designed for. The report says the tool can make tight curves and square cuts, but notes limits with corrugated panels and thicker vinyl products.
The TS1 attaches to a drill or impact driver and is specified for materials including sheet metal, metal building panels, vinyl siding and ductwork. Hunker says it weighs 1.75 pounds and measures 8.5 by 8.75 by 7.5 inches. According to the report, its small jaw size allows users to start a cut in a hole as small as half an inch.
Hunker describes the attachment as useful for curves and square cuts, while noting that Malco says the TS1 makes straight cuts and cuts to the left. Hunker says a cut in vinyl can be made left-handed by flipping the workpiece if necessary. Without an optional drill clamp, the report says, users need both hands to operate the tool.
The article cites a Home Depot rating of 4.1 stars from 185 ratings, with 81% of purchasers recommending the product. Hunker says the sole reviewer it found who specifically discussed cutting vinyl gave the tool five stars.
A Faster Option for Siding Cuts
For homeowners installing or repairing siding, Hunker says a utility knife is suited to straight cuts against a guide, but can be harder to control on curves and may follow the siding’s embossed grain. The report describes the TurboShear as another option and says it can cut vinyl without chipping, including in cold weather.
The attachment’s appeal depends on how often a DIYer needs it. At the reported $69.98 price, it costs less than many standalone power shears, but it also requires a compatible drill or impact driver. Hunker notes that the TS1 cuts to the left and that vinyl can be flipped to make a left-handed cut if necessary. The report also describes limitations with corrugated panels and thicker materials.
There is also a maintenance trade-off. Hunker says the TS1’s cutting jaws wear over time, particularly when used on metal, and that replacement blades are available. The report describes the replacement process as simple.
Products Worth Considering
Arlo Pro Wireless Security Camera, 2K HDR, 6th Gen, 4-Camera Kit
Shark AV2501AE AI Robot Vacuum with XL HEPA Self-Empty Base
Dyson V8 Cyclone Cordless Vacuum
As an affiliate, we earn on qualifying purchases.
Where the TS1 Fits
Hunker says the TurboShear TS1 is designed primarily for metal cutting and that it can also cut vinyl siding. The report says typical vinyl siding ranges from about 0.035 to 0.055 inches or more. It also notes that even the thinnest vinyl plank flooring cited in the article is 2 millimeters thick, and says the TS1 will not perform properly on thicker materials such as vinyl plank flooring.
Home Depot reviewers cited by Hunker have reported problems with ribbed or corrugated panels. Hunker says adjusting the jaws wider may help with corrugations, but advises returning them to a narrower setting for long cuts in flat vinyl.
Hunker also compares the TS1 with other options. It says DeWalt sells a slightly cheaper drill attachment with slightly worse ratings, while Skyshalo’s model is much cheaper and Vevor’s attachment is identical to Skyshalo’s, with few ratings. The report describes Malco’s purpose-built TSV1 Vinyl Siding Shears as having a wider jaw opening and a telescoping drill clamp, but lists its price at $210 to $267. Those prices and product comparisons reflect the report’s cited market information and may change.
“The TS1 makes straight cuts and cuts to the left.”
— Malco, as described in Hunker’s report
Limits Across Vinyl Profiles
The report describes the TS1’s performance and cites customer reviews, but does not provide a direct, timed comparison between the TS1 and a utility knife. Its statements about clean cuts, cold-weather use and ease of handling are attributed to Hunker’s account and customer reviews.
It is also unclear how the attachment performs across every brand and profile of siding. Hunker reports possible trouble with ribbed or corrugated panels and offers advice about adjusting the jaws. The reported price and ratings are tied to retailer information and can change. No source information establishes how long the jaws last under a particular user’s workload.
Check Fit Before Buying
DIYers considering the TS1 should check the siding’s thickness and profile, confirm that their drill or impact driver is compatible, and consider whether their work requires left- or right-directed cuts. For repeated work on corrugated or thicker siding, the wider-jawed TSV1 or a dedicated shear may be a better fit, though Hunker lists those alternatives at substantially different prices.
Before starting a project, users should follow the manufacturer’s instructions for attaching and operating the tool and wear appropriate eye and hand protection. The next practical step is to test the setup on a spare piece of the same siding, since the report does not establish performance for every panel type or project condition.
Key Questions
Can the Malco TurboShear TS1 cut vinyl siding?
Hunker says it can, although the TS1 is designed for metal. The report describes it as suitable for many vinyl siding cuts, but not every panel profile or thickness.
Is the TS1 suitable for vinyl plank flooring?
The report says it is not suitable for thicker materials such as vinyl plank flooring. It cites even the thinnest LVP at 2 millimeters, beyond the TS1’s stated range.
What cuts can the TurboShear make?
Hunker says the attachment can handle straight cuts, tight curves and square cuts, and can start cuts through a hole as small as half an inch. Malco describes the TS1 as making straight cuts to the left; flipping the workpiece can help orient the cut.
How much does the TS1 cost?
Hunker lists the TurboShear TS1 at $69.98. Retail prices may change, and the report notes that an optional Malco drill clamp costs about $30.
What should buyers know about corrugated siding?
Hunker says the TS1 can have difficulty with ribbed or corrugated panels. Widening the adjustable jaws may help, but the report suggests returning them to a narrower setting for long cuts in flat vinyl.
Source: hunker.com
