TL;DR
Get cleaning gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Pro Tool Reviews reports that DeWalt’s DCS359 20V Max XR oscillating multi-tool increases its oscillating arc to 4.2 degrees, adds a lower speed range and improves vibration control over the DCS356. The reviewer found it cut wood, mild steel and #5 rebar effectively, but DeWalt’s numerical performance claims have not been independently verified in the report.
Pro Tool Reviews has reviewed DeWalt’s DCS359, a 20V Max XR oscillating multi-tool that the publication says improves on the DCS356 with a wider oscillating arc, four speed settings and an anti-vibration system. The reviewer reported fast, clean cuts in several test materials, while noting that DeWalt’s comparative claims about cutting speed and vibration still need verification.
The DCS359 uses a brushless motor and a 4.2-degree oscillating angle, compared with 3.2 degrees on the DCS356. Pro Tool Reviews describes the larger arc as a longer blade stroke that can support more aggressive cutting. The tool also offers four speed settings from 8,000 to 20,000 oscillations per minute, versus three settings on the DCS356, which start at 13,000 OPM. A variable-speed trigger lets users adjust speed while working.
In its hands-on review, the publication says it tested the tool on wood, mild steel and #5 rebar. The reviewer found the DCS359 produced fast, clean cuts and was easier on the hands than the prior model. The report also describes the tool-free Quick-Change OIS interface as making blade and accessory swaps quick. These are the reviewer’s observations, not a controlled, published comparison with measurements across competing tools.
The tool weighs 2.8 pounds without a battery and measures 11.75 inches long. Pro Tool Reviews says it is about 16% heavier and half an inch longer than the DCS356. The reviewer praises the grip and rubber overmolding and says DeWalt “nailed the feel and weighting” of the tool. The review lists the DCS359 at $249 as a bare tool and $299 as a kit; those prices are the figures in the report and may vary by seller or date.
A Wider Arc, With a Heavier Body
The DCS359’s changes include cutting action and speed control. The added lower-speed setting gives users a wider range of speeds, and the reviewer says the variable-speed trigger helps when starting a cut. The reviewer’s tests suggest the combination worked well across several materials, though the report does not provide timed results to quantify the speed advantage.
Vibration matters because sustained use can affect comfort and control, particularly during detailed work. Pro Tool Reviews says the DCS359’s isolation system made a noticeable difference compared with the DCS356. But DeWalt’s claim of up to 43% less vibration is not backed in the report by instrument readings. Buyers weighing the tool against alternatives should treat that percentage as a manufacturer claim, not an independently established result.
There is a trade-off: the DCS359 is larger and heavier than its predecessor, and the review calls it a little expensive. Users who prioritize reduced vibration and broader speed control may value the changes; those focused on a lower-cost tool may find the price less appealing.
Products Worth Considering
Blueair Blue Pure 511i Max Smart Air Purifier
eufy Security SoloCam E42 4-Camera Kit with HomeBase 3, 4K Solar Security Cameras
Philips Hue Festavia 65-Foot Smart LED String Lights, 250 Color-Changing Mini LEDs
As an affiliate, we earn on qualifying purchases.
How It Compares With the DCS356
The DCS359 follows DeWalt’s DCS356 in the company’s 20V oscillating-tool lineup. According to the review’s specifications, the DCS356 has a 3.2-degree arc, three speed settings at 13,000, 17,000 and 20,000 OPM, and a listed bare-tool weight of 2.46 pounds. The new model’s 4.2-degree arc and 8,000-to-20,000 OPM range are the main specification changes highlighted by the publication.
The report also compares the DCS359’s arc and speed range with Milwaukee’s 2836, saying they are nearly the same in those respects. It says the DeWalt’s vibration was improved over the DCS365, but remained behind the Makita XMT04 and Bosch GOP18V-34 in the reviewer’s experience. The article does not supply a standardized test protocol or numerical head-to-head results for those comparisons.
“The DCS359 offers the fastest cutting speed and lowest vibration in its 20V lineup.”
— DeWalt, as quoted in the Pro Tool Reviews report
Performance Claims Still Need Testing
The review does not report measured cut times, vibration readings or a controlled comparison against other tools. It says DeWalt’s claim that the DCS359 has the fastest cutting speed and lowest vibration in its 20V lineup needs further verification; the stated up-to-43% vibration reduction likewise remains a manufacturer claim in the material provided.
The supplied report does not state a publication date or establish whether the listed prices are current across retailers. It provides no battery-life results, while discussing vibration and ergonomics in relation to extended use and longer jobs. The reviewer’s positive impressions should be read as hands-on observations rather than a full set of quantified test results.
More Testing Could Clarify Results
Pro Tool Reviews says it will provide more hands-on feedback on the DCS359. That additional feedback may offer further insight into the tool’s performance and vibration. Until then, readers have the specifications and the reviewer’s initial material tests, but not independently measured confirmation of DeWalt’s comparative claims.
Key Questions
What is the main change in the DeWalt DCS359?
The DCS359 increases the oscillating arc to 4.2 degrees, up from 3.2 degrees on the DCS356. It also adds four speed settings spanning 8,000 to 20,000 OPM and an anti-vibration system.
What materials did the reviewer test?
Pro Tool Reviews says it tested the tool on wood, mild steel and #5 rebar. The reviewer reported fast, clean cuts but did not publish timed or instrument-measured comparisons.
Is DeWalt’s 43% vibration reduction confirmed?
No independent measurement appears in the supplied review. The up-to-43% figure is attributed to DeWalt; the reviewer separately says vibration felt improved compared with an earlier model.
How much does the DCS359 weigh and cost?
The report lists the bare tool at 2.8 pounds and gives prices of $249 for the bare tool and $299 for a kit. Retail prices may differ, and the report’s publication date is not specified.
Source: protoolreviews.com
